Filter
Top Products
46
Arranging Embroidery Designs
Specifying sewing
attributes
1. Select an embroidery pattern or the Text tool.
2. Click the Sewing Attributes tab.
(1) Click to return to the default setting.
(2) Hint view
With each change in the settings, a
preview of the stitching can be checked
here.
3. Change the sewing attributes displayed under
Line sew or Region sew.
The settings are applied to the
embroidery pattern each time the settings
are changed.
c
For details on the different sewing
attributes and settings, refer to “Line
sewing attributes” on page 68 and
“Region sewing attributes” on page 69.
Changing the pattern of
programmable fill stitch
1. Select an embroidery pattern.
2. Display the Sewing Attributes pane.
3. From the Region sew type selector, select
Prog. Fill Stitch.
4. Click 1 below Programmable fill in the
Region sew section.
5. Click the fill stitch pattern, and then click OK.
The pattern is applied to the inside
regions of the embroidery pattern.
b Memo:
The sewing attributes displayed in the dialog
box depend on the selected sew type.
Adjust
with slider.
(2)
(1)
(1)
XE8656-001.book Page 46 Thursday, June 30, 2011 2:56 PM