Filter
Top Products
31
Creating Embroidery Patterns
Creating Embroidery Patterns
(3) If Auto Generate was clicked, is
selected and an outline of mask was
automatically detected from the image.
The Auto Generate button is available
only with images that have a light-colored
background, like in this photo.
(4) Zoom
(5) Clicking the Image Tune button displays
an Image Tune dialog box.
Settings for Sharpness, Brightness and
Contrast can be selected with the sliders.
(6) To exit the Stitch Wizard, close the Select
Mask dialog box.
To select a different image, click Cancel,
and then repeat the procedure, starting by
selecting a conversion method.
■ Set Output Size dialog box
If Color, Sepia or Gray was selected for Photo
Stitch 1, Photo Stitch 2 or Cross Stitch, or if Auto
Punch was selected:
The following dialog box appears.
Adjust the position and size of the image, and then
click Next to continue to the next step.
• Drag the image to the desired position.
• Drag the handle to adjust the image to the
desired size.
■ Gray Balance / Set Output Size
dialog box
If Mono was selected for Photo Stitch 1 or Photo
Stitch 2:
The following dialog box appears.
Adjust the position and size of the image and the
gray balance, and then click Next to continue to the
next step.
• Drag the image to the desired position.
• Drag the handle to adjust the image to the
desired size.
• Drag the slider (1) to adjust the gray
balance.
b Memo:
Click
Fit to Page
to adjust the image to the
size of the Design Page.
Embroidery
pattern
size
(1)
Embroidery
pattern
size
XE8656-001.book Page 31 Thursday, June 30, 2011 2:56 PM