Filter
Top Products
2-22
Cisco ASR 903 Router Hardware Installation Guide
OL-25178-04
Chapter 2 Preparing for Installation
Receiving the Cisco ASR 903 Router
Note Most Cisco documentation is available online. Documentation that is shipped with your
Cisco ASR 903 Router includes the Regulatory Compliance and Safety Information for the
Cisco ASR 903 Router document, and the Cisco ASR 903 Router Documentation Roadmap that contains
information about the various documents that are available online and the links to them.
Accessories kit Chassis rack-mount brackets (19-inch EIA)
Three sets of screws:
• Front and rear rack-mount bracket screws (2 sets)
• Cable-management bracket screws
Six cable-management brackets (one per bracket)
One earth lug with two 10-32 screws.
1 RJ45 to RJ45 crossover cable
1 RJ45 to DB-9 (female) adapter
ESD, wrist strap (disposable) One disposable wrist strap (optional)
Documentation Regulatory Compliance and Safety Information for the Cisco ASR 903 Router
Optional equipment Check the container for the following optional equipment:
• Power cord if an AC power supply was shipped. There are no cords for the DC
power supply units.
• T1/E1 cable connector (required only for T1/E1 interface modules)
Table 2-2 Cisco ASR 903 Router Shipping Container Contents (continued)
Component Description