Filter
Top Products
10
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
How to Install, Upgrade, or Downgrade NME-NAM-120S
Opening a Session
This section describes how to open a session on the network module.
Note • Before you install your application software, opening a session brings up the bootloader. After you
install the software, opening a session brings up the application.
• You can conduct only one session at a time.
SUMMARY STEPS
From the Router CLI
1. enable
2. service-module integrated-service-engine slot/0 session clear
3. service-module integrated-service-engine slot/0 session
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enters privileged EXEC mode on the
host router. Enter your password if
prompted.
Step 2
service-module integrated-service-engine slot/0 session clear
Example:
Router# service-module integrated-Service-Engine 1/0 session clear
[confirm]
[OK]
Router#
Make sure there is not an existing
session which will prevent this
session to login successfully.
Step 3
service-module integrated-service-engine slot/0 session
Example:
Router# service-module integrated-Service-Engine 1/0 session
Trying 172.20.98.151, 2066 ... Open
Cisco Network Analysis Module (NME-NAM-120S)
NAM.domain.name login:
Begins a session on the specified
module.