Filter
Top Products
43
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
What to Do Next
For information on the NAM Traffic Analyzer, see the User Guide for the Network Analysis Module
Traffic Analyzer for your NAM software release. This document is available as online help within the
NAM Traffic Analyzer application and on Cisco.com at the following URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps5401/products_user_guide
_book09186a00807ed53e.html
Changing the NAM Root Password
This procedure sets a new password to access the root (read/write) level of NAM, where you can enter
NAM CLI commands. The factory-set default root password is root.
Prerequisites
Before performing this task, access the NAM console by performing the steps described in the “Closing
a Session” section on page 11.
SUMMARY STEPS
1. password root
2. Enter the new password.
3. Enter the new password again.
4. exit
DETAILED STEPS
Command or Action Purpose
Step 1
password root
Example:
root@localhost.company.com# password root
Starts the process of changing the NAM root (read/write)
level password.
Step 2
Enter the new password.
Example:
New UNIX password: <password>
Enters the new password.
Step 3
Enter the new password again.
Example:
Retype new UNIX password: <password>
Confirms the new password.
Step 4
exit
Example:
root@localhost# exit
Logs out of the NAM system.