Filter
Top Products
3
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Prerequisites for NME-NAM-120S
Note The NM-NAM is not supported on ISR G2 platforms.
To determine which IOS release your router is currently running, examine the output of the show version
command.
Network Modules
To install an NME-NAM-120S network module, see the following:
• Connecting Cisco NAM Enhanced Network Modules to the Network
http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/
namnme.htmll
• Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information
http://www.cisco.com/en/US/docs/routers/access/interfaces/rcsi/IOHrcsi.html
To install an NME-NAM-120S network module in supported ISR G2 platforms using the NM Adapter
Card, see the following:
• Installing Cisco Network Modules and Service Modules, section “Using Network Modules in
Service Module Slots on Cisco 2900 Series and Cisco 3900 Series Routers”:
http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/InstNe
tM.html
NME-NAM-120S
• The NME-NAM-120S ships from the factory with the following:
–
120 GB hard disk
–
1 GB memory
–
64 MB flash memory
• Make a note of the network module location in the host router:
Cisco 3845 ISR Cisco IOS 12.4(9)T No
Cisco 3825 ISR Cisco IOS 12.4(9)T
Cisco 2851 ISR Cisco IOS 12.4(9)T
Cisco 2821 ISR Cisco IOS 12.4(9)T
Cisco 2811 ISR Cisco IOS 12.4(9)T
Cisco 3745 MSR Cisco IOS 12.4(9)T
Cisco 3725 MSR Cisco IOS 12.4(9)T
Table 2 NME-NAM Supported Router Platforms (continued)
Router Platform IOS Version (Minimum)
NM Adapter Card
Required?