Filter
Top Products
51
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
Configuring Logging Options and Generating Diagnostics
To configure logging options for NME-NAM-120S, use commands as needed from the list of common
network module commands shown in Table 5 and Table 6.
Note Some keyword options for many of the log and trace commands is provision to display diagnostic output
on your screen or to pipe it to a file or a URL.
Router#
show version Displays information about the loaded
router, software or network module
bootloader version, and also hardware
and device information.
Router#
test scp ping Pings the network module to check
network connectivity.
Router#
verify Displays version information for installed
hardware and software.
SE-Module>
ping Pings a specified IP address to check
network connectivity (does not accept a
hostname as destination).
Table 4 Common Verification and Troubleshooting Commands (continued)
Configuration Mode Command Purpose
Table 5 Common Syslog Commands
Configuration Mode Command Purpose
Router#
show log Displays the contents of the specified log.
copy log Saves the syslog to a destination of your
choice.
show log Displays the contents of the specified log.
show logs Displays a list of available log files.
Table 6 Common Trace Commands
Configuration Mode Command Purpose
clear trace Clears logged trace events for specified
modules.
log trace Logs configured traces to the network
module (can be done locally or remotely).
no trace Disables tracing for specified modules,
entities, or activities.
show errors Displays error statistics by module,
entity, or activity.
show trace Displays trace settings.