Filter
Top Products
38
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
SUMMARY STEPS
1. enable
2. configure terminal
3. ip cef
4. interface type slot/port
or
interface type slot/wic-slot/port
5. analysis-module monitoring
6. Repeat Step 4 and Step 5 for each interface that you want the NAM to monitor.
7. end
8. show running-config
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip cef
Example:
Router(config)# ip cef
Enables the Cisco Express Forwarding switching path.
Step 4
interface type slot/port
or
interface type slot/wic-slot/port
Example:
Router(config)# interface serial 0/0
Selects an interface for configuration.
Step 5
analysis-module monitoring
Example:
Router(config-if)# analysis-module monitoring
Enables NAM packet monitoring on the interface.
Step 6
Repeat Step 4 and Step 5 for each interface that you
want the NAM to monitor through the internal NAM
interface.
—