Filter
Top Products
49
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
Table 3 Common Shutdown and Startup Commands
Configuration
Mode Command Purpose
Router#
service-module
integrated-service-engine slot/0 reload
(or for the NM-NAM)
service-module analysis-module
slot/0 reload
Shuts down the network module
operating system gracefully, then restarts
it from the bootloader.
Router#
service-module
integrated-service-engines slot/0 reset
Resets the hardware on a module. Use
only to recover from shutdown or a failed
state.
Caution Use this command with
caution. It does not provide an
orderly software shutdown and
consequently might impact file
operations that are in progress.
Router#
service-module
integrated-service-engine slot/0 session
Accesses the specified service engine and
begins a network module configuration
session.
Router#
service-module
integrated-service-engines slot/0
shutdown
Shuts down the network module
operating system gracefully. Use when
removing or replacing a hot-swappable
module during online insertion and
removal (OIR).
Router#
service-module
integrated-service-engine slot/0 status
Displays configuration and status
information for the network module
hardware and software.
Router(config
)#
shutdown Shuts down the entire system (host router
plus network module) gracefully.
ServiceEngine
bootloader>
boot Starts the helper or application.
ServiceEngine
bootloader>
reboot Shuts down NME-NAM-120S without
first saving configuration changes, then
reboots it from the bootloader.
root@hostname
.domain
reboot Gracefully reboots NME-NAM-120S
from the NAM CLI.
root@hostname
.domain
shutdown Shuts down the NME-NAM-120S
application gracefully, then shuts down
the module.