Filter
Top Products
41
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
DETAILED STEPS
Command or Action Purpose
Step 1
Open a NAM console session from the router. See the
“Closing a Session” section on page 11.
or
Open a Telnet or SSH session to the NAM. See the
“Opening and Closing a Telnet or SSH Session to the
NAM” section on page 45.
Accesses the NAM CLI.
Step 2
ip http server enable
or
ip http secure server enable
Example:
root@localhost# ip http server enable
Example:
root@localhost# ip http secure server enable
Enables the HTTP server.
or
Enables the HTTP secure server (HTTPs).
Step 3
Enter a web username.
or
Press Return to enter the default web username admin
Example:
Please enter a web administrator user name
[admin]: joeadmin
Example:
Please enter a web administrator user name
[admin]: <CR>
Configures a web username.
• The NAM requires at least one web username and
password configuration.
• If NAM does not prompt you for a web username and
password, then at least one web username and password
combination was previously configured.
Step 4
Enter a password.
Example:
New password: <adminpswd>
Configures a password for the web username.
Step 5
Enter the password again.
Example:
Confirm password: <adminpswd>
Confirms the password for the web username.