Filter
Top Products
16
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
How to Install, Upgrade, or Downgrade NME-NAM-120S
Example:
Cisco Systems, Inc.
Services engine helper utility for NME-NAM-120S
Version 1.1(0.5)
-----
Main menu
1 - Download application image and write to HDD
2 - Download application image and reformat HDD
3 - Download bootloader and write to flash
4 - Download helper and write to Compact Flash
5 - Display software versions
6 - Reset application image CLI passwords to default
7 - Change file transfer method (currently ftp/http)
8 - Show upgrade log
9 - Send Ping
f - Format the Compact Flash
r - Exit and reset Services Engine
h - Exit and shutdown Services Engine
Selection [123456789frh]:
Step 10 Reboot the NME-NAM-120S using helper menu option r.
Step 11 Close the session as described in Closing a Session, page 11.
Upgrading the NAM Application Image — Patch
This section describes how to add a patch to your NAM application image from the NAM CLI.
SUMMARY STEPS
1. Access the NME-NAM-120S console by following the steps described in Opening a Session,
page 10.
Note Depending on the previous state of the session, you might be prompted to log in to the NAM CLI.
2. At the NME-NAM-120S prompt, enter one of:
patch ftp://user:passwd@host/full-path/filename
or
patch ftp://user@host/full-path/filename
3. show patches
4. Close the session as described in Closing a Session, page 11.