Filter
Top Products
34
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
Configuring the NME-NAM-120S For Network Connectivity
This section describes how to configure the NME-NAM-120S to establish network connectivity and
configure IP parameters. This task must be performed from the NAM CLI. For more advanced NAM
configuration, use the NAM Traffic Analyzer (web GUI) or see the Network Analysis Module Command
Reference for your NAM software release.
Prerequisites
Before doing this procedure, access the NAM console. See “Opening a Session” section on page 10.
SUMMARY STEPS
Note You might have already done Steps 1 and 2 if you have configured the NME-NAM-120S for management
using either Configuring the Internal Interface for Management—IP Unnumbered, page -21 or
Configuring the External Interface for Management, page -28.
1. ip interface {internal | external}
2. ip address ip-address subnet-mask
3. [Optional] ip broadcast broadcast-address
4. ip gateway ip-address
5. exsession on
or
exsession on ssh
6. ip domain name
7. ip host name
8. ip nameserver ip-address [ip-address][ip-address]
9. ping {host | ip-address}
10. show ip