Filter
Top Products
2
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Contents
Contents
• Prerequisites for NME-NAM-120S, page 2
• Restrictions for the NME-NAM-120S, page 4
• NAM Software, page 5
• How to Install, Upgrade, or Downgrade NME-NAM-120S, page 7
• Configuring the NME-NAM-120S for Management, page 21
• Managing the NME-NAM-120S, page 48
• Additional References, page 52
• Glossary, page 55
Prerequisites for NME-NAM-120S
The following prerequisites are required to use the NME-NAM-120S module with NAM software.
Supported Branch Routers
The NME-NAM-120S (and NME-NAM-80S) can be deployed in any network module slot in the Cisco
router platforms listed in Table 2. A Network Module (NM) Adapter Card, SM-NM-ADPTR, is required
to successfully integrate the NME-NAM into supported ISR G2 platforms. The NME-NAM supports
the router platforms with NAM software version 3.6 or later. Only one Cisco NAM can be installed in
a Cisco branch router.
NM-NAM Supports branch routers which include the 2600XM, 2800, 3660, 3700, and
3800 series multi-services and integrated services routers
WS-SVC-NAM-1 Support the Cisco Catalyst 6500 switches and Cisco 7600 routers
WS-SVC-NAM-2
WS-SVC-NAM-1-250S
WS-SVC-NAM-1-250S
Table 1 Network Analysis Modules (continued)
SKU Description
Table 2 NME-NAM Supported Router Platforms
Router Platform IOS Version (Minimum)
NM Adapter Card
Required?
Cisco 3945 ISR Cisco IOS 15.0(1)M Yes
Cisco 3925 ISR Cisco IOS 15.0(1)M
Cisco 2951 ISR Cisco IOS 15.0(1)M
Cisco 2921 ISR Cisco IOS 15.0(1)M
Cisco 2911 ISR Cisco IOS 15.0(1)M