Filter
Top Products
ALIGNINGTHERIVINGKNIFEWITHTHE
BLADE
See Figures26 - 28.
_l, WARNING: Make sure the switchisoff, the
switchkey is removed, and yoursaw is
unplugged.Failure to do so could resultin
accidental starting, causing serious personal
injury.
The rivingknife must be alignedwithend centered
overthe blade.
_I, WARNING: It is importantto installand adjust
the rivingknifecorrectly.Pooralignment could
cause kLckbackand throwthe workpiece at the
operator.
• Raisethe blade guard.
• Placea framing squareor straightedgebesidethe
bladeon the left. See Figure26.
• Loosenthe front screw on the rivingknife with a
5 mm hex key. See Figure 27.
• Center the rivingknifeover the blade. See Figure
28.
• Securelytightenthe screw witha 5 mm hex key.
RMNGKNIFE
BLADE
SAW
TABLE
FRAMINGSQUARE Fig. 26
BLADEGUARD
RIVINGKNIFE
BLADE
/
Fig. 27
RIVINGKNIFE
I
/
FRAMING
SQUARE
BLADE
_ROAT
PLA_
/
TOPVIEWOFSAWWITHRIVING
KNIFESHOWNCENTEREDOVERBLADE
Fig. 28
rRIIfTSMRN" TABLESAY/315.22S310 26