Filter
Top Products
Component Ident
ification
Adjust Rotary Switch
The rotary switch setting indicates which zone the
temperature control module will control in the system.
The HPTCM uses an 8-position rotary switch. The
LPTCM uses a 16-position rotary switch.
Set the rotar
y switch (S) to the specific selection
according to
the settings listed in the following tables.
S
HPTCM Rotary Switch Location
Figure 16
S
LPTCM Rotary Switch Location
Figure 17
HPTCM A and B Rotary Switch Settings
Setting
Zone
0HeatedHose
1 Not Used
2 Not Used
3 Not Used
4 Not Used
5
Not Used
6 Not Used
7
Not Used
LPTCM A and B Rotary Switch Settings
Setting
Zone
0 Not Used
1 Not Used
2 Not Used
3 Not Used
4 Not Used
5
Not Used
6 Not Used
7
Not Used
8 Not Used
9 Not Used
A Booster Heat A
B Booster Heat B
C
Not Used
D Not Used
E Not Used
F Not Used
3A1705J
27