Filter
Top Products
USB Data
USB Data
USB Logs
Note
TheADMcanread/writetoFAT(File
Allocation Table) storage devices. NTFS,
used by 32 GB or greater storage devices,
is not supported.
During operation, the ADM stores system and
performance related information to memory in the
form of log files. The ADM maintains four log files:
• Event Log
• Job Log
• Daily Log
• System Software Log
• Blackbox Log
Follow Download Procedure, page 91,toretrieve
log files.
Each time a USB flash drive is inserted into the ADM
USB port, a new folder named DATAxxxx is created.
The number at the end of the folder name increases
each time a USB flash drive is inserted and data is
downloaded or uploaded.
Event Log
The event log file name is 1–EVENT.CSV and is
stored in the DATAxxxx folder.
The event log maintains a record of the last 49,182
events and errors. Each event record contains:
• Date of event code
• Time of event code
• Event code
•Eventtype
• Action taken
•E
vent Description
Event codes in
clude both error codes (alarms,
deviations,
and advisories) and record only events.
Actions Taken includes setting and clearing event
conditions by the system, and acknowledging error
conditions by the user.
Job Log
The job log file name is 2–JOB.CSV and is stored
in the DATAxxxx folder.
The job log maintains a record of data points
based on the USB Log Frequency defined
in the Setup screens. The ADM stores the
last 415,413 data points for download. See
Setup - Advanced Screen 3 — USB, page 46,for
information on setting the Download Depth and USB
Log Frequency.
• Data poi
nt date
• Data poi
nt time
•Asidehe
at exchanger temperature
•Asideb
oost heater temperature
•Bsideh
eat exchanger temperature
•Bsideb
oost heater temperature
•Hoset
emperature
•Engin
e coolant temperature
•Aside
temperature setpoint
•Bside
temperature setpoint
•Hose
temperature setpoint
•Asid
epressure
•Bsid
epressure
•Pre
ssure setpoint
•Sys
tem lifetime pump cycle counts
•Pre
ssure, volume, and temperature units
3A1705J 89