Filter
Top Products
Errors
Errors
View Errors
When an error
occurs the error information
screen displ
ays the active error code and
description
. To diagnose the active error, see
Troublesho
ot Errors, page 73.
The error code, alarm bell, and active errors will scroll
in the status bar. For a list of the ten most recent
errors see Troubleshooting, page 74.
There are three types of errors that can occur. Errors
are indicated on the display as well as by the light
tower (optional).
Alarms a
re indicated by
. This condition indicates
aparame
ter critical to the process has reached a
level re
quiring the system to stop. The alarm needs
to be add
ressed immediately.
Deviations are indicated by
. This condition
indicates a parameter critical to the process has
reached a level requiring attention, but not sufficient
enough to stop the system at this time.
Advisories are indicated by
. This condition
indicates a parameter that is not immediately critical
to the process. The advisory needs attention to
prevent more serious issues in the future.
Troubleshoot Errors
See Error Codes and Troubleshooting, page 74 for
causes and solutions to each error code.
To troubleshoot the error:
1. Press the soft key for help with the active error.
Note
Press
or to return to the
previously displayed screen.
2. Press
to s
elect one of following conditions
that are
present in the system until you are able
to diagnose the error. Press
to return to the
previous screen.
3. Select conditions that are present in the system
until a cause has been identified. Press
to
go the troubleshooting screen that displays the
ten most recent errors.
3A1705J 73