Filter
Top Products
-20-
G0675 10" Jointer/Planer Combo Machine
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
Basic Jointer
Controls
This section covers the controls used during
routine jointer operations. To use the machine
as a planer, you must perform a conversion (see
Jointer-Planer Conversion on Page 22).
ON/OFF Button (Figure 20): Starts or stops
motor when pushed in.
Figure 20. ON/OFF button locations.
Table Movement: Raise or lower the infeed table
adjustment lever (Figure 21) to control how much
stock is removed by the cutterhead.
Figure 21. Fence and table height controls.
Fence Lock
Infeed Table
Adjustment
Lever
Outfeed Table
Lock
Scale
On
Button
Off Button