Filter
Top Products
Chapter 3. Mass-Distributions 59
Draft Document for Review November 15, 2007 3:27 pm 4372ch03.fm
3.1.2 Capturing the system image
1. Power on the Window XP System that is to be cloned and boot it to the
network so that Tivoli Provisioning Manager for OS Deployment can discover
and manage it as shown in Figure 3-5 on page 59. After the TPM server
identifies the computer and writes a basic hardware scan data into the Tivoli
Provisioning Manager for OS Deployment database, the guest will display the
following screen. If you do not see this screen within a 30 seconds of the
splash screen then you may have some server communication issues.
Figure 3-5 Booting the system to be cloned
2. Login to the server Console and select the OS Deployment → Host Monitor
in the left panel. Select the newly discovered system in the Host Monitor’s
host view and choose Start admin toolkit from the left panel menu. Or,
right-click on the discovered host and select Start admin toolkit from the
pop-up menu as shown in Figure 3-6 on page 60.
Tip: Forcing the IBM SurePOS system to boot from the network may
require changes to the boot order. This is described in Appendix A,
“Alternate boot sequence on POS systems” on page 133