Filter
Top Products
B-3
OPERATION
B-3
POWER WAVE® AC/DC 1000
PRODUCT SUMMARY
The Power Wave AC/DC 1000 is a high performance,
digitally controlled inverter welding power source. It is
capable of producing a variable frequency and ampli-
tude AC output, DC positive output, or DC negative
output without the need for external reconnection. It
utilizes complex, high-speed waveform control to sup-
port a variety of constant current and constant voltage
welding modes in each of its output configurations.
The Power Wave AC/DC 1000 power source is
designed to be a part of a modular welding system.
Each welding arc may be driven by a single machine,
or by a number of machines in parallel. In multiple arc
applications the phase angle and frequency of differ-
ent machines can be synchronized with the use of an
external System Interface to improve performance
and reduce the effects of arc blow.
The Power Wave AC/DC 1000 is primarily designed to
interface with compatible ArcLink equipment.
However, it can also communicate with other industri-
al machines and monitoring equipment via DeviceNet,
or Ethernet. The result is a highly integrated and flexi-
ble welding cell.
RECOMMENDED PROCESSES
The Power Wave AC/DC 1000 is designed for sub-
merged arc welding (SAW). Due to its modular design
the Power Wave AC/DC can operate on either single
arc or multiple arc applications. Each machine is fac-
tory preprogrammed with multiple welding procedures
to support all types of submerged arc welding. The
Power Wave AC/DC 1000 carries an output rating of
1000 amps, 44 volts (at 100% duty cycle). If higher
currents are required machines can be easily paral-
leled.
PROCESS LIMITATIONS
The Power Wave AC/DC 1000 is suitable only for the
processes listed.
Do not use Power Wave AC/DC 1000 for pipe thaw-
ing.
EQUIPMENT LIMITATIONS
The Power Wave AC/DC 1000 is not to be used in
outdoor environments.
Operating Temperature Range is 32°F to 104°F(0°C
to +40°C).
Only the ArcLink Power Feed 10S series wire feeders
and Power Feed 10A controller may be used in a
standard system. Other Lincoln or non-Lincoln wire
feeders can only be used with custom interfaces.
The Power Wave AC/DC will support a maximum
average output current of 1000 Amps at 100% Duty
Cycle.
COMMON EQUIPMENT PACKAGES
Basic Package
K2344-1 or Power Wave AC/DC 1000
K2344-2
K2370-1 Power Feed 10S Head Wire Feeder
K2362-1 Power Feed 10A Controller / User
Interface
K1543-xx Control Cable (5 pin – 5 pin) - power
source to controller.
K1785-xx Control Cable (14 pin – 14 pin) -
power source to wire feeder.
Optional kits
K2282-1 System Interface - for Synchronizing
multiple arc applications.
K1795-xx Control Cable (22 pin – 22 pin) - for
paralleling / multiple arc applications.
K2312-1 Power Feed 10SF wire feeder (for fix-
ture builders).
K2311-1
Power Feed 10SM Motor Conversion
Kit (to convert existing NA-3/NA-4/NA-5
wire feeder gear boxes).
K2444-1 CE, C-Tick Filter Kit
RECOMMENDED EQUIPMENT
(See Installation Section)