Filter
Top Products
#200A
#200B
#201
FIGURE F.21 – BRUSHHOLDER LEAD REMOVAL
STATOR/ROTOR REMOVAL AND REPLACEMENT PROCEDURE
(CONTINUED)
PROCEDURE
12. Label and remove brush leads #201(-) and
#200B(+) from the brush holder assembly.
(The Piggy-backed leads connect closest to
the stator terminations.) See Figure F.21.
13. Pull the harness containing plug J30, the
brush leads, and the field bridge rectifier
through the bushing in the firewall. See
Figure F.20.
14. Using a 3/8” wrench, remove the brush holder
assembly.
15. Using the 1/2” wrench, disconnect leads #68A
and #69A at their bolted connections beneath
the power module assembly. Label the leads
for reassembly. Cut any necessary cable ties.
See Figure F.22.
TROUBLESHOOTING & REPAIR
F-98 F-98
VANTAGE® 400
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC