Filter
Top Products
MAINTENANCE
D-2 D-2
VANTAGE® 400
SAFETY PRECAUTIONS
• Have qualified personnel do all maintenance
and troubleshooting work.
• Turn the engine off before working inside the
machine or servicing the engine.
• Remove guards only when necessary to
perform maintenance and replace them when
the maintenance requiring their removal is
complete. If guards are missing from the
machine, obtain replacements from a Lincoln
Distributor. (See Operating Manual Parts List.)
WARNING
Read the Safety Precautions in the front of this
manual and in the Engine Owner’s Manual before
working on this machine.
Keep all equipment safety guards, covers, and
devices in position and in good repair. Keep
hands, hair, clothing, and tools away from the
gears, fans, and all other moving parts when
starting, operating, or repairing the equipment.
------------------------------------------------------------
Routine Maintenance
At the end of each day’s use, refill the fuel tank to
minimize moisture condensation in the tank. Running
out of fuel tends to draw dirt into the fuel system.
Also, check the crankcase oil level and add oil if
indicated.
I
C
C
I
I
R
R
I
I
I
I
I
R
R
R
R
R
I
I
I
I
R
R
R
Battery
Leaks or engine damage
Injector performance
All nuts and bolts for tightness
Electrical systems
Valve clearances
Tighten cylinder head
Renew the engine breather
Air filter element
Air filter (earlier check may be required)
Alternator drive belt
Alternator drive belt wear
Tension of alternator drive belt
F
Water separator element
uel filter canister
Drain water separator & fuel strainer
Engine oil filter
Engine oil (NOTE 1 & 3)
Engine oil level (NOTE 1)
Coolant (NOTE 3)
Concentration of Antifreeze
Coolant Level
MAINTENANCE ITEM
S26354 VM
Contact Perkins
Intake .008", exhaust .008"
Donaldson #P821575
Perkins #080109107
Perkins #130366120
Lincoln # M20840-A
Perkins #140517050
8.45
qt.,
8L
(Including filter)
9.5 qt., 9.0 L
50/50 Water/Ethylene Glycol
TYPE OR QUANTITY
(3) Fill slowly! Ensure correct quantity is used.
Above operations to be carried out by trained personnel with referencetothe
workshop manual where necessary.
Thesepreventive maintenance periods applytoaverage conditions of operation.
If necessary, use shorter peroids.
I = Inspect C = Clean R = Replace
Notes:
(1) Consult Engine Operators Manual for oil recommendations.
(2) Consult Engine OperatorsManual for additionalmaintenanceschedule
information.
ENGINE SERVICE
ENGINE SERVICE (NOTE 2)
EVERY DAY OR EVERY 8 HOURS
EVERY 100 HOURS OR 3 MONTHS
EVERY 250 HOURS OR 6 MONTHS
EVERY 1000 HOURS
FIRST SERVICE (20 / 50 HOURS)
EVERY 500 HOURS OR 12 MONTHS
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC