Filter
Top Products
INSTALLATION
A-2 A-2
VANTAGE® 400
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.
* To Top of enclosure, add 10.68”(271.3mm) to top of exhaust pipe. Add 6.67”(169.4mm) to top of Lift Bail.
2. Reduced to less than 32V in the CC-stick Mode when VRD (VOLTAGE REDUCTION DEVICE) is on.
TECHNICAL SPECIFICATIONS - VANTAGE® 400 (K2410-1) (K2410-2)
RATED OUTPUT @ 104° F (40° C) - WELDER
HEIGHT WIDTH DEPTH WEIGHT
35.94* in. 25.30 in 60.00 in.
913 mm 643 mm 1524 mm
LUBRICATION EMISSIONS FUEL SYSTEM GOVERNOR
Full Pressure (K2410-1) EPA Tier II Mechanical Fuel Pump, Auto air bleed system Mechanical
with Full Flow Filter (K2410-2) EPA Tier
4 Interim Electric shutoff solenoid, Indirect fuel injector.
AIR CLEANER ENGINE IDLER MUFFLER ENGINE PROTECTION
Low noise Muffler: Shutdown on low oil
Single Element Automatic Idler Top outlet can be rotated. pressure & high engine
Made from long life, aluminized steel. coolant temperature
ENGINE WARRANTY: 2 years / 2000 hours, all non-electric components, 3 years major non-electric compo-
nents . See Perkins warranty for details.
Welding Process
DC Constant Current
DC Pipe Current
Touch-Start™TIG
DC Constant Voltage
Output Range
30 TO 500 AMPS
40 TO 300 AMPS
20 TO 250 AMPS
14 TO 36 VOLTS
Max. Weld OCV
@Rated Load RPM
60 Volts
2
Welding Output
Current/Voltage/Duty Cycle
400A / 36V / 100%
450A / 32V / 100%
300A / 32V / 100%
250A / 30V / 100%
400A / 36V / 100%
450A / 32V / 100%
Auxiliary Power
1
12,000 Watts Peak, / 11,000 Watts Continuous, 60 Hz 120/240 Volts Single Phase
19,000 Watts Peak, / 17,000 Watts Continuous, 60 Hz, 240 Volts 3-Phase
PHYSICAL DIMENSIONS
ENGINE
RECEPTACLES AUXILIARY POWER CIRCUIT BREAKER OTHER CIRCUIT BREAKERS
(2) 120VAC GFCI Duplex (5-20R) Two 20AMP for Two Duplex Receptacle 10AMP for Battery Charging Circuit
(1) 120/240VAC Dual Voltage (1) 50AMP for Dual Voltage and for 10AMP for 42V Wire Feeder Power
Full KVA (14-50R) 3-Phase (3-pole)
(1) 240VAC 3-Phase (15-50R)
MACHINE SPECIFICATIONS
RATED OUTPUT @ 104° F (40° C)
.
- GENERATOR
1230 lbs. (559kg.)
Make/Model Description Speed (RPM) Displacement Starting Capacities
PERKINS cu. in. (ltrs.) System
(K2410-1) 4 cylinder 135.6(2.2)
12VDC Battery &
Fuel: 15 gal.
404C-22 32.7 HP High Idle 1880 starter (57 L)
1800 RPM
Bore x Stroke inch (mm)
(Group 34; 650
Oil: 8.45Qts. (8L)
naturally aspirated Full Load 1800 cold crank amps)
(K2410-2) water cooled
3.43 X 3.64
65 Amp Alternator Radiator Coolant:
404D-22 Diesel Engine Low Idle 1400 (87.1 x 92.5mm) W / Built in Regulator 8.0 Qts. (7.6L)
INPUT - DIESEL ENGINE
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC