Lincoln Electric 400 Welder User Manual


 
Battery
Drawer
Left Case Side
Roof
Lift Bale Seal
Fuel Tank Seal
Right Side Service
Access Door
Right Case Side
Fuel Tank Cap
FIGURE F.1 – DOOR REMOVAL
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE (CONTINUED)
PROCEDURE
1. Turn the engine off.
2. Using the 3/8" wrench, remove the battery
cover. Slide the battery out and disconnect the
negative battery cable.
3. Unlatch and open the right side service access
door. See Figure F.1.
4. Slide the door back 8” to notch in rail. Lift left
hinge from track. Slide door forward 2” to notch
in rail and lift right hinge from track.
5. Remove access door.
6. With the 1/2” wrench, remove the exhaust pipe
rain cap.
7. Remove the fuel tank cap, gasket, and the lift
bail cover seal.
8. Remove the screws mounting the roof in place.
9. With the help of an assistant, carefully remove
the roof. Replace the fuel cap.
10. With the 3/8” wrench, remove the right case
side and the left case side. See Figure F.1.
TROUBLESHOOTING & REPAIR
F-22 F-22
VANTAGE® 400
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC