Lincoln Electric SVM125-A Welder User Manual


 
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TROUBLESHOOTING & REPAIR
F-33 F-33
CLASSIC II
ALTERNATOR ROTOR REMOVAL
AND REPLACEMENT (continued)
FIGURE F.12 – FUEL TANK REMOVAL
CABLE
RETAINER
FUEL
BOWL
FUEL
LINE
FUEL TANK
RETURN LINE
FUEL TANK
MOUNTING
HARDWARE
See Figure F.12 for steps 11 - 15.
11. Turn off the fuel at the fuel bowl and remove
the fuel line. Plug the line to prevent
spillage.
12. With the 9/16" wrench, remove the four nuts,
bolts and washers that mount the fuel tank
to the rails.
13. Using pliers remove the fuel return line from
the top of the fuel tank.
14. Slightly lift the fuel tank and remove the
cable retainer. A large screwdriver will be
required to pry the cable retainer from the
fuel tank rail.
15. Carefully remove the fuel tank.