Filter
Top Products
INSTALLATION
A-2 A-2
LN-9 GMA Wire Feeder
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TECHNICAL SPECIFICATIONS
INPUT POWER
Supplied by power source: 115 VAC, 50/60 Hz., 350 VA
WIRE FEED SPEED
80 to 980 inches per minute (2.03 to 24.9 meters per minute)
VOLTAGE CONTROL RANGE
12.0 TO 60.0 VDC
TEMPERATURE RANGE
OPERATION: - 20
o
C to +40
o
C (- 4
o
F to +104
o
F) Recommended
- 40
o
C to +40
o
C (- 40
o
F to +104
o
F) Maximum Rated
STORAGE: - 40
o
C to +85
o
C (- 40
o
F to +185
o
F)
WIRE DIAMETERS
0.023 through 1/16 Solid Electrode
0.045 through 5/64 Cored Electrode
PHYSICAL DIMENSIONS
LENGTH WIDTH HEIGHT TOTAL WEIGHT LESS
ELECTRODE
LN-9 GMA (2 ROLL) 12.15 in. 11.56 in. 12.19 in. 29.3 lbs
(308.4 mm) (293.4 mm) (309.4 mm) (13.3 kg)
LN-9 GMA (4 ROLL) 12.15 in. 11.56 in. 12.19 in. 27.5 lbs
(308.4 mm) (293.4 mm) (309.4 mm) (12.4 kg)
LN-9F GMA Control Box 10.4 in. 6.17 in. 11.26 in. 16.3 lbs
(264 mm) (156.6 mm) (293.4 mm) (7.4 kg)
LN-9F GMA Wire Drive (2 ROLL) 8.06 in. 7.5 in. 12.78 in. 15.6 lbs
(204.6 mm) (190.4 mm) (324.4 mm) (7.1 kg)
LN-9F GMA Wire Drive (4 ROLL) 8.06 in. 7.5 in. 12.78 in. 20.5 lbs
(204.6 mm) (190.4 mm) (324.4 mm) (9.2 kg)