Filter
Top Products
882.00207.00 Chapter 4: Operation 60 of 102
Figure 42: Typical Recipe Book Operator Screen
Save Running Recipe to the Book
The save current recipe to book function allows the operator to save the contents of the current
recipe to the recipe book under a desired number.
Upon selecting this function, the operator will be prompted for a reference recipe number. This may
be any number from 1 to 50.
The assigned recipe number will be used for all further references to this recipe until deleted. The
operator should be familiar with the recipe numbers used. We suggest keeping a loose-leaf notebook
with 50 tabbed pages as a reference to what is kept in the blender so this can be the standard for all
blenders in the plant, etc. To save a running recipe to the Recipe Book perform the following steps:
1. Enter the Recipe Book by touching the Recipe Book icon located on the Recipe Screen.
2. Select a stored recipe by changing the number next to “Recipe #.”
3. Touch “Save Running Recipe” and then “Done.”
Load a Saved Recipe from the Book
The load from book function allows the operator to retrieve a previously stored recipe from the
recipe book and install it into the current recipe menu. This will overwrite the current recipe, so
make sure that it has been saved to the book before installing a new recipe in its place. To load a
previously stored recipe from the Recipe Book:
1. Enter the Recipe Book by touching the Recipe Book icon located on the Recipe Screen.
2. Select a stored recipe by changing the number next to “Recipe #.”
3. Touch “Load” and then “Done.” This takes you back to the Recipe Screen.
4. Touch “Accept New Recipe” to accept the loaded recipe into the blender.
Display Recipe Contents
The display recipe function is used to verify the contents of a recipe number before it is loaded from
the recipe book. In order to view the desired recipe, the operator must enter the number which
contains the recipe he wishes to view. Once a valid recipe number is entered, the display will
indicate the contents of the stored recipe in percentages.
Note: If replacing the current recipe with one that is downloaded from the Recipe
Book, make sure that the previous recipe has been saved because it will be
overwritten by the new downloaded recipe.
Erase One
Stored
Recipe
Select a Stored
Recipe
Stored Recipe
Details
Erase Entire
Book
Load Stored
Recipe
Go to Recipe
Page