Filter
Top Products
882.00207.00 Chapter 5: Maintenance 63 of 102
Chapter 5: Maintenance
5-1 Preventative Maintenance Schedule
The mechanical design of the blender is very simple and very little maintenance is required. The
only moving parts are the metering gates, weigh hopper dump valve, and mixer agitator. The
checklist below contains a list of items which should be inspected and/or replaced to keep your
blender operating at peak efficiency. Perform each inspection at the regular intervals listed below.
Figure 44: Sample Preventative Maintenance Schedule
System model #
Serial #
Daily
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Inspect blender for
any loose parts-
tighten them
immediately.
Verify quality of
compressed air
supply.
Verify mixer door is
properly latched.
Every week
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Date/
By
Inspect metering
gates for proper
operation.
Check to make
sure that all hose
connections are air
tight.
Every month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Inspect air regulator
and air safety
circuits, if equipped.
Recalibrate blender
only If necessary.
Photocopy this page for your maintenance records