Filter
Top Products
882.00207.00 Chapter 7: Appendix 97 of 102
RECIPE INFO (THIS IS WHERE YOU RIGHT THE NEW RECIPE TO)
1 (RW) temp_recipe_entry_mode,D1706, SHORT VALUE (0=percentage mode, 1=parts mode, 2=EZ mode)
2 (R) temp_batch_size_recipe_value,D1234,LONG VALUE (xxx.x lbs or kgs)
3 (RW) pv1_hop1_temp_recipe_value,D1110,LONG VALUE (xxx.xx, write your new recipe here)
4 (RW) pv1_hop2_temp_recipe_value,D1112,LONG VALUE (xxx.xx, write your new recipe here)
5 (RW) pv1_hop3_temp_recipe_value,D1114,LONG VALUE (xxx.xx, write your new recipe here)
6 (RW) pv1_hop4_temp_recipe_value,D1116,LONG VALUE (xxx.xx, write your new recipe here)
7 (RW) pv1_hop5_temp_recipe_value,D1118,LONG VALUE (xxx.xx, write your new recipe here)
8 (RW) pv1_hop6_temp_recipe_value,D1120,LONG VALUE (xxx.xx, write your new recipe here)
9 (R) pv1_recipe_error_message,D1690, SHORT VALUE(1=total not 100%, 2=feeder type error, 3=entry
over 100%)
10 (R) pv1_accept_recipe_enabled,M504 (this bit goes high if a new recipe is valid)
11 (RW) pv1_accept_recipe_requested,M506 (toggle this bit to accept a valid recipe, you must also reset this
bit after completion)
CURRENT RECIPE INFO (THIS IS THE RECIPE THAT IS CURRENTLY BEING MADE)
1 (R) current_recipe_entry_mode,D1688,SHORT VALUE (0=percentage mode, 1=parts mode, 2=EZ mode)
2 (R) current_batch_size_recipe_value,D1168,LONG VALUE (xxx.x lbs or kgs)
3 (R) current_hop1_recipe_value,D1150,LONG VALUE (xxx.xx, recipe value for running recipe)
4 (R) current_hop2_recipe_value,D1152,LONG VALUE (xxx.xx, recipe value for running recipe)
5 (R) current_hop3_recipe_value,D1154,LONG VALUE (xxx.xx, recipe value for running recipe)
6 (R) current_hop4_recipe_value,D1156,LONG VALUE (xxx.xx, recipe value for running recipe)
7 (R) current_hop5_recipe_value,D1158,LONG VALUE (xxx.xx, recipe value for running recipe)
8 (R) current_hop6_recipe_value,D1160,LONG VALUE (xxx.xx, recipe value for running recipe)
HIDDEN RECIPE INFO (THIS IS THE RAW RECIPE THAT WILL BE LOADED AT NEXT
BATCH)
1 (R) recipe_entry_mode,D1686,SHORT VALUE (0=percentage mode, 1=parts mode, 2=EZ mode)
2 (R) batch_size_recipe_value,D1146,LONG VALUE (xxx.x lbs or kgs)
3 (R) hop1_recipe_value,D1128,LONG VALUE (xxx.xx, recipe value for running recipe)
4 (R) hop2_recipe_value,D1130,LONG VALUE (xxx.xx, recipe value for running recipe)
5 (R) hop3_recipe_value,D1132,LONG VALUE (xxx.xx, recipe value for running recipe)
6 (R) hop4_recipe_value,D1134,LONG VALUE (xxx.xx, recipe value for running recipe)
7 (R) hop5_recipe_value,D1136,LONG VALUE (xxx.xx, recipe value for running recipe)
8 (R) hop6_recipe_value,D1138,LONG VALUE (xxx.xx, recipe value for running recipe)
9 (R) recipe_target_total,D1144,LONG VALUE (xxx.xx, the is the total of hop1-hop6 from above, you must
manually add this if you chose to skip the blenders error checking, you must also ensure that you are in the
correct recipe_entry_mode! SEE BELOW FOR DETAILS)