Filter
Top Products
10
Revision History
The revision history for each edition of the manual is listed below:
Edition Revision History
E0600 First Printing
Problems, Questions, and Suggestions
If you have any problems or questions with our hardware, software, or documentation,
please contact either your HP Response Center or your local HP representative. If you
have access to a web browser, you can get the latest software and hardware patches at the
following URL:
http://www.hp.com/visualize/support/
Documentation Conventions
Unless otherwise noted in the text, this guide uses the following symbolic conventions.
Electrostatic Discharge (ESD) Precautions
Electrostatic charges can damage the integrated circuits on printed circuit boards. To
prevent such damage from occurring, observe the following precautions during board
unpacking and installation:
• Work on a static-free mat.
• Wear a static strap to ensure that any accumulated electrostatic charge is discharged
from your body to ground.
• Create a common ground for the equipment you are working on by connecting the
static-free mat, static strap, and peripheral units to that piece of equipment.
• Keep uninstalled printed circuit boards in their protective antistatic bags.
• Handle printed circuit boards by their edges, once you have removed them from their
protective antistatic bags.
Table 1. Documentation Conventions
user-supplied values Italic words or characters in syntax and command descriptions
represent values that you must supply. Italics are also used in text
for emphasis.
screen display Information that the system displays, commands that you must use
literally, and path names appear in this typeface.
Enter Keycaps are presented with a special keycap font as shown in the left
column. (In this document, we refer to the Enter key. On your
keyboard, the key may be labeled either Enter or Return.)