Filter
Top Products
Chapter 4 113
Boot Console Handler
Displaying System Information
Displaying System Information
The all command allows you to display the system’s processor revision and speed, cache
size, memory size, flag settings, and the boot and console paths. To display system
information, from the Information Menu type the following:
Information Menu: Enter command > all [Enter]
This information is paged to allow you to view it as necessary, unless the ScRoll command
has been used to disable scrolling.
Displaying PIM Information
The pim command allows you to display the most recent PIM information for the specified
fault type. To display PIM information for a specific fault, from the Service Menu, type the
following:
Service Menu: Enter command > pim
processor_number fault_type
[Enter]