HP (Hewlett-Packard) J6000 work stations Work Light User Manual


 
76 Chapter3
System Upgrades
Chapter Overview
Chapter Overview
This chapter contains the following main sections:
Tools Required
Exchange and Nonexchange Part Numbers
System Upgrades
Electrostatic Discharge (ESD) Precautions
Prerequisite for the System Upgrade Procedures
Front Bezel and Top Panel
Hard Disk Drives
CD ROM Drive
Memory DIMMs
I/O Cards
WARNING For most of the installation and removal procedures in this chapter,
you must power off the workstation and unplug the workstation
power cord from the AC power outlet. The exceptions to this are the
installation and removal of DIMMs and the I/O cards. For these you
only need to power off the workstation.
NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and
that all screws are properly seated.
Workstation Configurations
Refer to the HP Workstations web site for a complete list of supported accessories,
peripherals, and operating system versions for the J6000 workstations. The URL for the
web site is:
http://www.hp.com/visualize