Filter
Top Products
Chapter 3 81
System Upgrades
System Upgrades
Removing the Top Cover
Figure 3-1. Removing the Top Cover
To replace the top cover or front bezel, perform the above steps in reverse.
NOTE The graphics in these steps depict a desk side unit. If this is a rack mount
unit, the skins and pedestal will not be present. Rack mounted systems will
not have air louvres mounted in the front bezel. When replacing the bezel,
remove and discard the louvres from the new bezel unit.
1
2
- Remove all connectors from
back of workstation
- Remove workstation from
pedestal.
- Place workstation on a padded
surface
- Remove bezel
- Press in on both sides of bezel
and pull forward as shown.
- Remove top cover
1. Unscrew captive screw
2. Pull cover forward
3. Lift cover up.
1
2
1
2
3
3
4
- Attach anti-static strap
Hold down pedestal when
removing workstation