Filter
Top Products
04581740_ed2 37
To access and use Tool Test:
1. Press the Diag button on the Insight controller.
2. On the Diagnostics menu, select Tool Test and press Enter.
3. A pop-up message warns you that running the test interrupts spindle operations. Press Enter to continue.
4. For a xtured spindle, use the arrow keys to the Start Tool button and press Enter to run the spindle. Press Enter
again to stop the spindle.
5. If you are running the test with a handheld spindle, press the throttle as necessary to view the Speed, Torque, and
Angle results.
6. To run the Lamp Test, use the arrow keys to move the to the radio button next to the lamp ON icon and press Enter.
7. To turn the Lamp Test o, move to the radio button next to the lamp OFF icon and press Enter.
8. To change the direction to CW or CCW, move to the radio button for the direction you want and press Enter.
6.2 Event Log
Although the Event Log cannot be viewed on the IC-D display, all major events are recorded, and the log may be
accessed through the ICS software.
The Event Log records the date and time that certain important Insight events occur. The events recorded include
hardware and software faults (such as a spindle over-temperature event) and signicant user actions (such as changes to
a spindle’s transducer range or angle constant). This record of signicant events can help in troubleshooting problems.