Filter
Top Products
04581740_ed2 9
Section 2 – Installation
2.1 Mounting
Bolt the Insight controller enclosure to a suitable rigid surface near the assembly area using the mounting brackets on
the back of the enclosure. See the drawings below for dimensions, information on bracket hole spacing, recommended
mounting bolts, door opening clearances, and other mounting information.
Make sure the mounting is stable, secure, and level.
ADVERTISSEMENT
Attach the Insight enclosure to a structure capable of safely supporting its total weight. Failure to follow
installation instructions properly can result in structure collapse and personal injury.
Figure 6 - Front Dimensional Drawing