Filter
Top Products
A-5
INSTALLATION
MAXsa™ 22 & 29 WIRE DRIVES
A-5
SAFETY PRECAUTIONS
Read this entire installation section before you
start installation.
ELECTRIC SHOCK can kill.
• Only qualified personnel should per-
form this installation.
• Turn the input power OFF at the dis-
connect switch or fuse box before
working on this equipment. Turn off
the input power to any other equip-
ment connected to the welding sys-
tem at the disconnect switch or fuse
box before working on the equip-
ment.
• Do not touch electrically hot parts.
-------------------------------------------------------------
NON-STANDARD SAFETY INFORMATION
The PF-10S series of wire drives may be at weld-
ing voltage potential when the output of the power
source is active.
------------------------------------------------------------------------
INPUT AND GROUND CONNECTIONS
Only a qualified electrician should connect the
MAXsa™ 22 & 29 WIRE DRIVES. Wire Drive
Installation should be made in accordance with the
appropriate National Electrical Code, all local codes
and the information in this manual.
LOCATION AND MOUNTING
The MAXsa™ Wire Drivewill operate in harsh environ-
ments.
HIGH FREQUENCY PROTECTION
Locate the MAXsa™ Wire Driveaway from radio con-
trolled machinery.
WARNING
CAUTION