Filter
Top Products
OPERATION
B-4 B-4
POWER FEED® 25M
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
RECOMMENDED PROCESSES
• GMAW (CV, Synergic CV, Pulse, STT™, Power,
Pulse on Pulse™, Push-Pull)
• FCAW
• SMAW
• GTAW (Lift Start only)
• Solid wires .025" to 1/16"
• Cored wires .035" to 5/64"
• Cored wires .035" to 3/32" when configured for "extra
torque"
EQUIPMENT LIMITATIONS
• Works only on ArcLink® or LincNet™ Power Wave®
power sources.
• When operating on LincNet™ power sources, not all
features are available.
• Maximum gun length is 25ft.(7.6m) for push-only sys-
tems.
• Maximum gun length is 50ft.(15.2m) for push-pull
systems.
• Spool guns do not work with the POWER FEED®
25M.
• A remote control/foot amptrol and a push-pull gun
may not be connected to the POWER FEED® 25M
simultaneously.
• Maximum spool size is 12 in. (305 mm) diameter
• Maximum spool weight is 44 lb (20 kg).
• Maximum control cable length is 200 ft (61 m).
• Other gun bushings are required for welding guns
that do not have a Magnum® (Tweco #2-#4 compati-
ble) back end.
• No more than 2 wire feeders may be connected to
one ArcLink® power source at a time.
RECOMMENDED POWER SOURCES
• Power Wave® 355M
• Power Wave® 455M
• Power Wave® 455M/STT
• Power Wave® 655/R