Lincoln Electric SVM185-A Welder User Manual


 
TROUBLESHOOTING
E-6 E-6
POWER FEED® 25M
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
STATUS LIGHT STATES (CON’T)
LED State
Red LED blinking
at a fast rate
Red LED ON and
steady
Green LED ON
and steady
Power Source LED
Power source needs to be reprogrammed.
Contact your Local Authorized Lincoln Field
Service Facility.
Power source has a non-recoverable hard-
ware fault. Contact your Local Authorized
Lincoln Field Service Facility.
System normal and functional.
LED on any other nodes (components);
Wire Feeder, Control Box Etc.
System component (node) needs to be
reprogrammed. Contact your Local
Authorized Lincoln Field Service Facility.
System component (node) has a non-recov-
erable hardware fault. Contact your Local
Authorized Lincoln Field Service Facility.
System normal and functional.
Normal Blinking LED - Each illumination should exist for 0.5 seconds.
Fast Blinking LED - Each illumination should exist for 0.1 seconds.