Filter
Top Products
OPERATION
B-8 B-8
POWER FEED® 25M
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
START OPTIONS
END OPTIONS
SET
SETUP
IR PORT
CC Stick Soft
WAVEFORM CONTROL TECHNOLOGY
Stick
WELD MODE
ARC CONTROL
I
I
ARC FORCE
(Soft)-10.0 to
(Crisp)+10.0
DESCRIPTION
Arc Force adjusts the short cir-
cuit current for a soft arc, or for
a forceful, driving arc. It helps
to prevent sticking and shorting
of organic
coated
electrodes,
par
-
ticularity globular transfer types
such as stainless and low
hydrogen. Arc Force is espe-
cially effective for root pass on
pipe with stainless electrode
and helps to minimize spatter
for certain electrodes and pro-
cedure as with low hydrogen,
etc.
START TIME:
0 to 10 seconds
FUNCTION
If no remote control is installed,
this control sets the time for
the weld output to ramp up or
down from a preset Start cur-
rent to the preset Weld current.
Use the WFS/AMP knob to
adjust Start current while the
Start Options LED is displayed.
No arc ending options are active for
SMAW
(Stick) welding modes.
PROCESS
Stick Soft(7018)
Stick Crisp(6010)
MODE
1
2
CC STICK MODES
START OPTIONS
END OPTIONS
ARC CONTROL
194
0
WFS AMPS
VOLTS TRIM
LESS
AMPS
MORE
AMPS
O
UTPUT
OFF
OUTPUT
ON
n
FIGURE B.3
MSP4 OPERATION
SMAW (Stick) Welding Display