Cleaning and care
126
Preparing for the Self Clean program
The high temperatures used during
self cleaning will damage
acc
essories that are not designed for
cleaning in the Self Clean program.
Please remove these accessories
from the oven before starting the Self
Clean program. This also applies to
accessories purchased separately.
The following accessories are suitable
for cleaning during the Self Clean
pr
ogram and can remain in the oven:
– Shelf runners,
– FlexiClips with wire rack
HFCBBR30-2
,
– Wire oven rack HBBR30-2.
T
ake all accessories that are not "Self
Clean safe" out of the oven.
Place
the wire oven rack on the top
shelf level.
If not removed, coarse soiling can
smok
e and cause the Self Clean
program to turn itself off.
Remo
ve any coarse soiling before
running the Self Clean program.
Starting the Self Clean program
Danger of burns!
When
Self Cleaning the front of the
oven becomes hotter than with
normal oven use.
Prevent children from touching the
ove
n during the Self Clean program.
Select Maintenance.
Select Self Clean.
Selec
t the level required according to
the level of soiling.
Confirm with OK.
Follow the instructions in the display.
Confirm with OK.
Starting the Self Clean program
T
o start the Self Clean program
immediately, select Start Now.
Confirm with OK.
The Self Clean program will now start.
The door locks automatically. The oven
heating and the cooling fan will then
turn on au
tomatically.
The oven light will not turn on during
the Self Clea
n program.
The remaining time for the Self Clean
pr
ogram appears. The duration cannot
be changed.
You can use the timer while the Self
Clea
n program is running. At the end of
the kitchen timer time the buzzer will
sound and the Timer symbol will
flash. The time will then continue to
increase in the display.