Miele 09 898 020 Welding System User Manual


 
IMPORTANT SAFETY INSTRUCTIONS
23
Cleaning and care
Do not use a st
eam cleaner to clean the range.
The steam may reach electrical components and cause a short
circuit.
Only clean par
ts listed in these Operating and Installation
Instructions.
Scr
atches on the door glass can cause the glass to break.
Do not use abrasive cleaners, hard sponges, brushes or sharp metal
tools to clean the door glass.
The shel
f runners can be removed for cleaning purposes (see
"Cleaning and care"). Ensure they are correctly fitted after cleaning
and never operate the oven without the shelf runners inserted.
Ther
e is a seal around the oven interior which seals the inside of
the door. Take care not to rub, damage or move the gasket.
Do not use ove
n cleaners. Commercial oven cleaners or oven
liners of any kind should not be used in or around any part of the
oven.
Debris shoul
d be removed before running the Self Clean program.
If not removed this debris can smoke causing the self-cleaning
program to turn itself off.
The co
oktop is installed above a self-cleaning oven. Do not use it
during self-cleaning, as this could trigger the overheat protection on
the cooktop (see "Overheat protection").