Miele 09 898 020 Welding System User Manual


 
Moisture Plus
86
Injecting bursts of steam
Steam can cause scalding.
Do not open the door during bursts
of st
eam. Also, condensation on the
sensors will cause then to have a
slow reaction time.
Automatic burst of steam
Automatic burst of steam appears in the
display
.
Once the preheating phase has been
complet
ed, the automatic burst of
steam is injected.
The water will vaporize in the oven
while steam is being released and Burst
of steam active will appear in the display.
After the burst of steam Burst of steam,
completed will appear in the display
.
Continue cooking until the end of the
coo
king duration.
1, 2 or 3 Bursts of steam
Manual bursts of steam
When Manual
has been selected, you
can trigger bursts of steam once Start
Manual burst of steam appears.
Please wait until the preheating phase
is complet
ed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip: Set the "T
imer" as a reminder.
Select Start Manual burst of steam.
The burst of steam will be released and
Burst of steam active will appear in the
display
.
P
roceed as described to inject further
bursts of steam.
Burst of steam, completed will appear in
the display aft
er each burst of steam.
Continue cooking until the end of the
coo
king duration.
Time-controlled steam
The oven will release the steam after
the specified amount of time.