Filter
Top Products
Settings
67
Electrical Version
Setting the voltage (electrical version)
Selec
t the desired voltage and
corresponding frequency.
Confirm with OK.
Sensor group
Your oven was set at the factory to
aut
omatically detect the wireless roast
probe supplied. If you have purchased
a new Miele roast probe, you will need
to reset the sensor group (e.g. to P1-
D01-0000001).
Selec
t the sensor group that is
printed on the metal tip of the
wireless roast probe.
The sensor group is the second digit
of the twelve-digit code (P0 – P9).
Confirm with OK.
Calibrate temperature
Using temperature calibration the
t
emperature can be modified, in all
modes and Gourmet Center (oven) and
MasterChef (speed oven) programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled the oven
t
emperature is much higher than
indicated in the display. If no segment
is filled the oven temperature is much
lower than indicated.
Select
or , to adjust the
temperature calibration.
Confirm with OK.