Miele 09 898 020 Welding System User Manual


 
Settings
68
Showroom Program
This mode enables the oven to be
demonstr
ated in showrooms without
heating up. It should not be set for
domestic use.
Demo Mode
If you have demo mode activated
Demo Mode is active. The appliance will
not heat up will appear when you turn
on the oven.
On
Touch OK for at least 4 secon
ds to
activate demo mode.
Off
Touch for at least 4 seconds to
deactivat
e demo mode. The oven
can then be used as normal.
Factory default
Settings
Any settings that have been altered
will be r
eset to the factory default
setting.
Favorites
All Favorites will be deleted.
Default temperatures
Any default temperatures that have
been chang
ed will reset to the
factory default settings.
MyMiele
All MyMiele entries will be deleted.
Lift panel
Regardless of the setting selected, as
soo
n as you start the self-cleaning
cycle, the lift panel goes down
automatically.
Automatically
The lift panel lifts up automatically as
soon as you switch the oven on.
The lift panel goes down
automatically as soon as you switch
the oven off.
Manual
Touch the lift panel sensor button to
lift the contr
ol panel up and put it
down.