Filter
Top Products
Cleaning and care
127
As soon as "Timer" is pressed, the
buzz
er and the flashing indicator will
turn off.
Delaying the start of the Self Clean
pr
ogram
T
o delay the start of the Self Clean
program, select Start Later.
Set the time you woul
d like the
program to start at.
Confirm with OK.
The door will lock automatically. Start at
and the set star
t time appear in the
display.
Up until the start time you can alter the
star
t and end time with Change.
As soon as the start time has been
r
eached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.
At the end of the Self Clean program
When the duration remaining reaches
00:00 h, a message will appear in the
display t
o tell you that the door is
unlocking.
When the door lock has been
deactivat
ed:
– Program Finished
appears in the
display,
– A buzzer will sound if turned on (see
"Settings - V
olume - Buzzer tones").
T
urn the oven off.
Acoustic and visual signals are turned
off.
Danger of burns!
Danger of burns! Wait until the oven
has cooled down before removing
any residual soiling left in the oven
compartment from the Self Clean
program.
W
ipe any residues (e.g.ash) left
behind after the Self Clean program
out of the oven compartment and off
of any accessories. The amount of
ash will vary depending on how dirty
the oven was.
Most soiling can be easily removed
using a clean, soft sponge and a mild
solu
tion of warm water and liquid dish
soap.
Depending on the degree of soiling
befor
e cleaning, there may be a visible
layer of soiling across the inner glass
pane on the door. This should be
removed using the scouring side of a
dish sponge or with a stainless steel
spiral sponge and liquid dish soap.