Miele 09 898 020 Welding System User Manual


 
Frequently asked questions
135
Problem Possible cause and solution
A noise can be heard
aft
er the appliance is
turned off.
The fan will continue running until the appliance has
cooled down. It will then switch itself off
aut
omatically.
One or several burners
flash in
the display.
The burner knob has been turned to the right or left
for mor
e than 30 seconds.
T
urn the knob to 0. If the error message does not
go out, there is a technical fault. Call Customer
Service.
The knob is not on Off;
a power level is set for
the b
urner. The burner
does not heat up.
lights up in the display
or flashes in alternation
with .
There was a power interruption during operation.
The burner has been turned on for more than 3
minu
tes without a suitable pan on it.
The maximum operating time for the burner has been
e
xceeded.
T
urn the burner knob to 0.
The burner can be started up again.

flashes in the
display in
a
lternation with
numbers.
There is a fault in the electronics.
Di
sconnect the power supply of the cooktop for
approx. 1 minute. If the problem persists after
reconnecting the power supply, contact Miele
Customer Service.
This display is dark. The time of day display is deactivated. When the
appliance is turned off, the time of day display is
turned off.
As soon as the oven is turned on, the time of day
wil
l appear. If you want it to be displayed
continuously, the setting to turn the time of day
display back on must be changed (see "Settings –
Time of day - Display").
There is no power to the appliance.
Check if the cir
cuit breaker has tripped.
System Lock  appears
in the display when the
oven is turned on.
The system lock is On.
Y
ou can unlock the oven to start a cooking
program by pressing for at least 6 seconds.
T
o permanently deactivate the lock, see "Settings
- System Lock ".