IMPORTANT SAFETY INSTRUCTIONS
14
During
installation, maintenance and repair work, e.g. if the oven
lighting is broken (see "Frequently asked questions"), the range must
be completely disconnected from the household electricity supply. It
is only completely isolated from the electricity supply when:
– The main circuit breaker has been tripped, or
– The plug fuses have been fully unscrewed (where applicable), or
– The power cable has been unplugged from the wall outlet.
Un
plug the cable by pulling on the plug, not on the cord.
Do not use a power strip or e
xtension cord to connect the range
to electricity. These are a fire hazard and do not guarantee the
required level of appliance safety.
Any contact with live connections or tampering with the electrical
or mecha
nical components of the range will endanger your safety
and may lead to appliance malfunctions.
Do not open the appliance housing under any circumstances.
This applianc
e must not be installed and operated in mobile
installations (e.g. on a ship).
Any r
epairs not performed by a Miele authorized service
technician will void the warranty.
Defective co
mponents should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
Risk of electri
c shock! If the ceramic surface of the stovetop is
defective or chipped, cracked or broken in any way, immediately
switch the stovetop off and do not continue to use it. Disconnect the
range from the power supply and contact Miele Technical Service.
If
the range is installed behind a cabinet door, do not close the
door while the appliance is in operation. Heat and moisture can build
up behind the closed door and cause damage to the range and to
the surrounding cabinets and flooring. Do not close the door until
the appliance has completely cooled down.