Filter
Top Products
OPERATION/CONTROL
53
Parameter
Number
Name Application
60 Intelligent mode selection
Used to cause the inverter to automatically set the appropriate parameters and
perform operation.
65 Retry selection
Used to select the alarm whose occurrence will cause the inverter to reset and
retry automatically.
66
Stall prevention operation reduction
starting frequency
67
Number of retries at alarm
occurrence
Used to set the number of retries to be made when an alarm occurs.
68 Retry waiting time
69 Retry count display erasure
Used to set the number of retries and the waiting time.
71 Applied motor
Used to set the thermal characteristic of the electronic overcurrent protection
according to the motor used.
72 PWM frequency selection Used to change the motor tone.
73 0-5V/0-10V selection
When using the voltage-input signal to perform operation, set the specifications of
the frequency setting signal input to across terminals 2-5.
74 Filter time constant
Used to set the input section built-in filter constant of an external voltage or
current frequency setting signal.
75
Reset selection/disconnected PU
detection/PU stop selection
Used to choose the reset selection, disconnected PU detection and PU stop
selection functions.
76 Alarm code output selection
Used to output a 4-bit digital signal from the open collector output terminals as the
definition of an alarm that has occurred.
77 Parameter write disable selection
Used to enable or disable the write of various parameters to prevent the
parameters from being rewritten by accidental operation.
78 Reverse rotation prevention selection Used to prevent reverse operation trouble due to the false input of the start signal.
79 Operation mode selection Use to choose the operation mode of the inverter.
160 User group read selection Used to read the values of the basic parameters or all parameters.
180 RL terminal function selection
181 RM terminal function selection
182 RH terminal function selection
183 RT terminal function selection
184 AU terminal function selection
185 JOG terminal function selection
186 CS terminal function selection
Used to choose and assign the functions of the input terminals.
190 RUN terminal function selection
191 SU terminal function selection
192 IPF terminal function selection
193 OL terminal function selection
194 FU terminal function selection
195 A, B, C terminal function selection
Used to choose and assign the functions of the output terminals.
240 Soft-PWM setting Used to change the motor tone.
244 Cooling fan operation selection Used to control the operation of the cooling fan incorporated in the inverter.
900 FM terminal calibration
901 AM terminal calibration
Used to calibrate the meters connected to terminals FM-SD and AM-5.
902 Frequency setting voltage bias
903 Frequency setting voltage gain
904 Frequency setting current bias
905 Frequency setting current gain
Used to set the magnitude (slope) of the output frequency as desired relative to
the frequency setting signal (0 to 5V, 0 to 10V or 4 to 20mA DC).
990 Buzzer control
Used to produce or mute the operational sound generated when you press the
keys of the operation panel and parameter unit.
Simple mode parameter