Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
LAN Configuration 4-17
v1.0, September 2009
2. Click the Edit Group Names option arrow at the right of the LAN submenu tabs. The
Network Database Group Names screen displays. (Figure 4-7 shows some examples.)
3. Select the radio button next to any group name to enable editing.
4. Type a new name in the field. The maximum number of characters is 15; spaces and double
quotes (") are not allowed.
5. Repeat step 3 and step 4 for any other group names.
6. Click Apply to save your settings.
Setting Up Address Reservation
When you specify a reserved IP address for a PC or device on the LAN (based on the MAC
address of the device), that PC or device always receives the same IP address each time it accesses
the UTM’s DHCP server. Reserved IP addresses should be assigned to servers or access points that
require permanent IP address settings. The reserved IP address that you select must be outside of
the DHCP server pool.
Figure 4-7