NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
8-30 Virtual Private Networking Using SSL Connections
v1.0, September 2009
Editing Network Resources to Specify Addresses
1. Select VPN > SSL VPN from the menu. The SSL VPN s submenu tabs appear, with the
Policies screen in view.
2. Click the Resources submenu tab. The Resources screen displays (see Figure 8-16 on page
8-29, which shows some examples).
3. In the List of Resources table, to the right of the new resource in the Action column, click the
edit table button. A new screen displays. (Figure 8-17 shows some examples.)
4. Complete the fields and make your selection from the pull-down menu as explained Table 8-8.
Figure 8-17
Table 8-9.
Add Resource Addresses Settings
Item Description (or Subfield and Description)
Add Resource Addresses
Resource Name The unique identifier for the resource. You cannot modify the resource
name after you have created it on the first Resources screen.
Service The SSL service that is assigned to the resource. You cannot modify the
service after you have assigned it to the resource on the first Resources
screen.